Swirve.com Links: Swirve.com   Free Email   Games   Fantasy Sports   E-Cards   Movies   Horoscopes   Freebies   Web Search


NOTICE: Beginning July 10th, 2008, this message board service will no longer be active or available for use.

C Melody Saxophone Forum / Repairs and Refurbishing / My leak light tells lies!

Captain Beeflat
User ID: 1738604
Jun 23rd 9:40 AM
My No.2 tenor has always been less than perfect at the low end.
A previous owner had dented the area immediately below low Eb, but the leak light said that this pad was sealing perfectly.
Time to take the horn to bits to sort it out; opportunity also to fit new hard pads.
The new pads revealed a raised section on the low Eb tone hole...light streaming out from either side; a distortion, caused presumably by the original bump. In the absence of banana shaped pads there was no alternative but to file down the raised section, thereby levelling the tone hole.
Problem solved...just breathe and all the low notes pop out solidly.
The reason ,of course, why the leak light lied on the first instance, was that a leak was present at the bottom of the indent of the original pad. Light travels in straight lines and would have to have turned through two 90 degree corners to reveal a leak; and old leather is hardly reflective.
Convinced now that the only way to check for leaks is either to blow smoke down the horn or to immerse yourself, with the horn, underwater and watch for bubbles.
bruce bailey
User ID: 9670323
Jun 24th 12:13 AM
When I find a "dip" in a tone hole, I cut a crecent shaped shim and insert under the pad in that area. It raises up the pad to meet the flaw. This is basic flute repair but does work on saxes. Filing the tone hole is OK but a lot of work. When a hole is really bad, a new hole can be soldered around the old one but only for really bad cases.
Captain Beeflat
User ID: 1738604
Jun 24th 3:20 AM
Sound advice bruce.
The difference being that mine was not a dip, but, unusually, a raised section of the tone hole encompassing perhaps 10 or 15 degrees; so filing this relatively narrow radial length of the tone hole seemed my easiest option.
bruce bailey
User ID: 9670323
Jun 25th 12:13 AM
That sounds like the best way.