Swirve.com Links: Swirve.com   Free Email   Games   Fantasy Sports   E-Cards   Movies   Horoscopes   Freebies   Web Search


NOTICE: Beginning July 10th, 2008, this message board service will no longer be active or available for use.

C Melody Saxophone Forum / Mouthpieces Reeds and Ligatures / Wurlitzer C Soprano

Next 20 Messages
Dean
User ID: 7705853
Jun 17th 9:23 AM
Anyone have any experience with mouthpieces for this horn? Intonation is unplayable with anything but the right mouthpiece. This one is chrome plated and may have been made by Conn or Buescher.
Alan (UK)
User ID: 8200143
Jun 17th 11:37 AM
Dean - if it's bright, and not silver, it could only be nickel plated - chrome finish wasn't available on saxes in the 20's - unless it's an 'after' finish... If it is nickel, it's reasonably rare, not many of those have surfaced.

I've had great success with vintage Link and Meyer Bb soprano mouthpieces on my Conn PanAm C-Soprano. They have a shorter shank than most modern Bb soprano mpcs , and so can be pushed on almost up to the octave keypad - which they need to be in order to play 'in tune'. See what vintage Bb soprano mpcs you can pick up on ebay, unless you find a 'C' one.

In fact the chamber volume of either of those Bb mpc's isn't that much greater than that of the original C-Soprano mouthpiece, just longer, so it needs to go way way in (literally past the end of the cork) to compensate.

As another option, there's a chap frequently offering a handful of C and Bb Soprano mpc blanks on ebay, think his name was Ron (?) - listed under "Look what the dog's dug up !" - you could buy a blank or five and get then faced to your own spec.
SelmerSaxMan
User ID: 0206274
Jun 17th 12:26 PM
rare. HAH! I have had 2 of them,
Alan (UK)
User ID: 8200143
Jun 17th 12:55 PM
Lucky you.... (if it's true...)
Alan(US)
User ID: 2261164
Jun 17th 5:29 PM
Alan(UK)......Everywhere I look on this forum, there goes SelmerSaxMan signifying and bragging and just outright sprouting bull****! I will repeat what I posted on another string on this forum! Mose Allison sang about SelmerSaxMan on his 60s Blues song titled "Your Mind is on Vacation, But Your Mouth is Workin' Overtime"! Amen! Amen! Amen!!!!!!!!! I am thoroughly convinced he has a MAJOR Inferiority complex manifested by pretending he knows all, has all, can do all! I wish it was possible to plug him into this website and exorcise him and give him electroshock therapy and a lobotomy all at the same time! Ah Yes; a Major Step Toward World Peace, or at least My peace of mind! SelmerSaxMan; From now on I will be scrutinizing your every statement and verifying them to the best of my sluething ability just to bring you out in the open. I shall have immense fun accomplishing this and consider it a public service that is long overdue! You need a compulsory attitude adjustment!
SelmerSaxMan
User ID: 0206274
Jun 17th 11:20 PM
Don't call something rare unless it really is. Sure nickel plated horns of any type are less common than the silver ones, but they are by no means rare. I have had 2 - one was a pos in its condition, and the other was quite nice - not optimal - it looked like a certain tech from louisiana might have worked on it. Both were acquired from knowledgeable shop owners. Bother were under 1100. a good condition c sop in silver can go for as much as 1600.

Alan US, you seem to be retarded mentally.

Alan (UK)
User ID: 8200143
Jun 18th 3:33 AM
Enough SSM ! Whilst I believe in free speech, there is a limit. I just hope you behave in real life as you do on this forum, we'll then have the satisfaction that, sooner or later, someone will do us all a favour.

Alan (US) - it's impossible to 'adjust' a bigot - unfortunately it's in the genes.

SSM - for your information - A bigot is a prejudiced person who is intolerant of any opinions differing from his own.
SelmerSaxMan
User ID: 0206274
Jun 18th 4:04 PM
Alan, not quite - you use websters only partially.
Doc Frazier
User ID: 0568574
Jun 18th 9:51 PM
SSM, the C sop that you had that was not in good condition, was it the one that you filed the rolled tone holes on?
musically HIS, Doc
SelmerSaxMan
User ID: 0206274
Jun 19th 3:14 AM
Doc, I would never file the tone holes on any rolled tone hole conn.
WW2
User ID: 9955583
Jun 21st 12:56 PM
The picture at the top of this page is my Wurlitzer C-Soprano. It is in a Conn Case but the octave key setup seems to be from Buescher. It is in satin silver plate, but shines quite well as you can see from the picture. For a better look go to:

http://mysite.verizon.net/res8o1o8/soprano.html

I bought this saxophone in April of 2001. It is silver-plated and came with a custom made mouthpiece. It plays well and is VERY LOUD! During one band rehearsal, I drowned out two flutes, two clarinets, two alto saxophones, and two tenor saxophones!

I was not satisfied with the mouthpiece it came with, so I bought a Selmer Paris D mouthpiece and a Rovner Dark ligature. I team these up with Van Doren Jazz #3 Reeds. This setup really cooks and plays in tune from Bb0 to Eb3 (the highest note on this saxophone). Of course, Eb3 on a C Soprano is the same as G3 on a Bb Soprano.

I have not ventured into the altissimo register on this saxophone, so I cannot tell how it will perform up there.
WW2
User ID: 9955583
Jun 21st 1:22 PM
By the way, I have heard that cutting off the shank of a Bb-Soprano mouthpiece allows it to work on the C-Soprano. The "custom" mouthpiece I have looks to be a Bb-Sop mouthpiece with the shank cut off. Then the chamber and remaining shank was filled and re-drilled. Unfortunately the shank drilling is slightly off center. However, it is a cosmetic problem and does not seem to affect the playability. The hand engraving on the mouthpiece is a leaflet pattern and the name "Morgan".

I spent two years searching for a real C-Soprano Mouthpiece before I finally found one. It also works fine. Now if only my embouchure would allow me to hit the palm-key notes consistently! Not enough time spent on practice since my main axe recently has been my Bass sax. Quite a difference between C-Sop and BBb-Bass!
Alan (UK)
User ID: 8200143
Jun 21st 5:11 PM
Wade - the vintage Bb Soprano Link and Meyer mouthpieces (acquired cheaply I should add) that I ese on my C-Sop do work very well - as, unlike modern mouthpieces, they have very little in the way of 'shanks'. As such, they still need to be pushed on literally up to the octave 'pip'.

I'm lucky enough to have the original C-Sop mpc, so I can compare the amount of chamber in the Bb's (well on) to the amount of chamber in the 'C' mpc normally on the cork. Very similar volumes, as the vintage Bb's didn't have big chambers anyway.

So, chopping the shank off a newer Bb sop mpc (as long as it doesn't have an very large (or small) chamber is reasonable. And, if the remains of the shank is 'rounded off', as opposed to 'cut square' the mpc will look the part.

I'm about to try that with a very nice Weltklang Bb sop ebonite (then I can sell the expensive ones, and eat...) so I'll let the forum know the results.

Funny how the higher pitched 'C' instruments have so much 'presence' - I can make my C-clari 'stand out' as well as the C-Sop, but a little Bundy Eb clari just sounds (well...) 'feeble'.

'C' rules, OK ???
miko
User ID: 2192024
May 28th 5:02 PM
i have a wurlitzer C-soprano. it has bevelled toneholes. doesn't that make it a martin stencil??
i found a C-soprano mouthpiece made by bill street of maine. it works just fine...
bruce bailey
User ID: 0937864
May 29th 12:16 AM
Should be a Martin. I have a C Melody that is a Martinitzer.
cmelodysax-uk
User ID: 8200143
May 29th 8:23 AM
And I have a C-Soprano that is a Martinealy......

Is it contagious ?
bruce bailey
User ID: 0937864
May 30th 1:26 AM
Is it a L&H with the clown face on the bell? I have a Bb soprano and silver alto like that.
cmelodysax-uk
User ID: 8200143
May 30th 5:30 AM
Bruce, no, just the normal Lyon & Healy , American Professional, Chicago - not much space on a C-Sop bell.

But I just noticed (still a project), the G# mechanism is so wierd, the pivot is right up by the Bb bis key. A bar goes up from the G# key to the pivot by the bis key, very close to the LH palm keys, and then all the way back down again to open the G# pad. Wierd, must be a 'space' issue - I'll check the Conn (PanAm) C-Sop mechanism later, don't think it's like the L&H.
bruce bailey
User ID: 0937864
May 30th 3:49 PM
That seems to be like the Buescher set-up with the pearl G#. My Martinhealy (not austin healy) has the low C# and G# on one lever shaped like an L. Perhaps yours is a Buescher!
cmelodysax-uk
User ID: 8200143
May 31st 7:31 AM
I'd almost agree, Bruce, except it has big chunky soldered/bevelled toneholes....

But, with the relatively limited number of C-Sops produced, I'd believe that designs and parts were begged/borrowed/bought/stolen between the various manufacturers - employees certainly were.

And, to add to the confusion, Lyon & Healy themselves once produced Martin'ish C-Mels with Conn influences. Too much for a mere mortal to understand.
Next 20 Messages