Swirve.com Links: Swirve.com   Free Email   Games   Fantasy Sports   E-Cards   Movies   Horoscopes   Freebies   Web Search


NOTICE: Beginning July 10th, 2008, this message board service will no longer be active or available for use.

C Melody Saxophone Forum / Neck Straight versus Curved / PROFECT: Fixing up old Buffet "C" sax

Back 20 Messages
Mr Twister
User ID: 2156654
Jan 16th 6:47 AM
Okay...where do I start...alright...here goes...I just acquired a really old (and smelly) Buffet Crampon (Evette and Shaeffer)silver "C Melody" sax as a "fix up" project...looks like it may have been used to kill rats at one time, since there are two posts that are broken off (I have them), the octave key mechanism and High "F" keys are missing (I don't have them), the solder on one key guard is half broken off and another is missing altogether (I don't have that either) and the cork on the neck is gone and so are other misc pieces...since this is obviously not my main horn (I play Alto)I plan on educating myself in the fine art of sax repairs.....that's right I plan on doing all of this myself, so a qualified repairman is not an option at this time. My questions are: 1)is this a feasible project (I'm fairly adept at handling tools and repairs of all kinds)since it may be rather difficult to obtain the missing pieces? 2)is it possible to obtain the missing pieces? If so where? Is it possible to "make" the
pieces?....Judging from the serial number and some
searching on the Web, I've concluded that this instrument may have been produced around 1917. Serial number is 24797. Any help on this would be greatly appreciated.
Thanks... Twister
Alan (UK)
User ID: 8200143
Sep 12th 1:17 PM
Lewis - I have a (C-Mel) Conn straight neck which works fine with only one pillar/post - the threaded one obviously. The spring in the guide holds the mechanism centrally. Obviously I couldn't use it properly like that.

I must replace it sometime, I guess an owner removed it, and the sax got sold without it. I keep looking at the spares saxes to see if anything is suitable - one day I'll find something. That Conn neck just has individual posts (or one, in my case....)
Alan (UK)
User ID: 2630464
Sep 16th 11:03 AM
I did mention above about "using a very fine (jewellers) saw to cleanly cut thro the base of one of the mounting posts". It would seem to be sensible to cut only thro the post supporting the slotted end of the threaded rod, if you need to remove any.

I did initially suggest the other one (threaded end), but in hindsight, probably best to leave the 'threaded end' post intact - far fewer alignment problems when replacing the 'slotted end' one. Still gives enough of the rod to easily grip with pliers.
Back 20 Messages